What to Do If Your Water Heater Suddenly Quits: Essential Steps

Call Today

Listed here in the next paragraph you will discover more outstanding ideas on the subject of No Hot Water — Water Heater Repair.


No Hot Water — Water Heater Repair
Many modern residences take advantage of an electrical water heater for their furnace, as a result of its comfort and simplicity of use. However, similar to any other electrical devices, issues may arise with its use, all of a sudden. It can be really frustrating to awaken to a cool shower instead of a hot one or having your bathroom with water that isn't hot enough or perhaps too warm. Whatever the case might be, hot water heater troubles can be fairly stressful. Luckily, we've made a checklist of possible remedies to your hot water heater concerns. There are a number of aspects that could trigger a number of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you switch off the major power supply for security. Whatever the problem is, getting it repaired ought to not pose too much of a problem if you comply with these steps:

Call A Professional:


If after changing all defective components and resetting your temperature level, the water heater still isn't working, you may need to speak to an expert plumber for an expert opinion. The problem with your heating unit could be that the hot and cold faucets have been switched over or it may be undersized for the amount of hot water needed in your house. Whatever the instance might be, an expert plumber would aid fix the issue.

Check Your Power Supply:


As standard as this may appear, it is very essential. Without sufficient power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the breaker is the issue, just transform it off and on once more. Replace any kind of broken or worn-out fuse. Evaluate the home appliance with power after these changes to see if it's currently functioning.

Check Your Thermostat:


If your water heater still isn't working or the water appearing isn't hot sufficient, you might require to inspect the temperature level settings on your top thermostat. Guarantee the circuit breaker is turned off before doing anything. Open up the gain access to panel and press the red button for temperature reset over the thermostat. This need to aid heat up the water. Turn the breaker back on and examine if the problem has actually been resolved.

Check the Burner in the Hot Water Heater:


If it's not a power trouble, then try checking out your burner if it is still functioning. Evaluate each of your burner to be sure the problem isn't with any one of them. If any of them is damaged, replace that part and then examine whether the hot water is back on.

Final thought


Hot water heater problems are not always major. Most of them are because of minor concerns like a blown fuse or worn-out burner. Changing the defective components need to suffice. Nevertheless, if you are still not able to address the problem, give a call to your nearest plumber ahead to get it repaired.


REASONS YOUR HOT WATER HEATER IS NOT WORKING & HOW TO FIX


Unlike appliances such as dishwashers and washing machines, the hot water heater in your home is used on a daily basis. This appliance is utilized to provide warm water for daily tasks including washing dishes, showering, laundry, and washing hands. Since your family utilizes the water heater on a daily basis, it is not unusual for problems to form. Fortunately, tank-style hot water heaters are engineered with a minimal number of parts. In fact, you may be able to repair a problem with your hot water heater without calling a professional. If your hot water heater is not working, we’ve compiled a list of ordinary issues and how to fix them.


Loose or Damaged In-Line Valve


Unlike a water leak near the bottom of your water tank, a water leak on top of your system can be easily fixed. A common cause of water tank leaks includes a loose in-line valve. This is a handle that is located at the top of the water tank that is engineered to activate or deactivate the flow of water. To fix this problem, you will need to secure the nut that holds the ball or in-line valve in its location. If the leak becomes more severe once it is tightened, you will be required to travel to your local hardware store to purchase a new in-line valve for your water heater.


Damaged Pressure Relief Valve


Most types of water heaters are equipped with a pressure relief valve that is engineered to discharge pressure from the water tank when it becomes too high. If this valve on top of your water heater begins to leak, we recommend purchasing a new one online or from your local store. The process of removing and replacing pressure relief valves is not complicated.


No Warm Water


If you have an electric water heater in your home, the most typical cause of a lack of warm water is a broken heating element. Your water heater is equipped with two heating elements that are tasked with heating incoming water in the water tank. Once a heating element begins to malfunction, you will have little to no hot water to use for showering, cleaning, and laundry.



On the other hand, there are a variety of problems that may stop the production of warm water in a gas water heater. This issue may be produced by a blown-out pilot light or a malfunctioning gas valve. A lack of hot water in your house may also be caused by a damaged thermocouple. Each of these components is able to be easily replaced by purchasing new components. If your hot water heater is not working, you should either purchase new parts or call a licensed plumber to receive help with a water heater repair.


Low Supply of Hot Water


Are you continuously running out of warm water? This issue may be a byproduct of a cracked dip tube. This tube is engineered to push cold water to the base of your water tank to be heated. Once a crack or hole begins to form in the dip tube, the incoming supply of cold water may be released near the top or middle of your tank. As a result, the cold water on top of the tank will be sent to the faucets and showers in your house. This hot water heater problem can only be fixed by replacing the dip tube on your system. Since the process of installing a new dip tube is complex, we recommend calling a certified technician for help.



A low supply of warm water may also be a signal of excess sediment buildup in your water tank. As your water heater reaches the middle of its life cycle, minerals in water including magnesium and calcium will begin to collect at the base of the water tank. As the minerals continue to grow, there will be less room in the water tank to store hot water. To resolve this problem, flush your water heater to remove the excess minerals.


Water is Too Warm or Cold


If the water in your shower feels uncomfortable hot or cold, you can adjust the temperature of your water by changing the settings on your thermostat. Setting the temperature to 120 degrees Fahrenheit may help you save money on your utility bills. This is an excellent temperature to use if you’re worried about scalding or skin irritation. Does this temperature feel too cold? You may also adjust the thermostat to 140 degrees Fahrenheit to make your showers more pleasant. If your hot water heater is not working when you change the temperature, this is an indicator of a broken thermostat. Immediately find a certified plumbing or heating contractor in your area to repair or replace your thermostat.


Low Water Pressure


Low water pressure is not always caused by a malfunctioning water heater. If you live in an older home with smaller water pipes, the flow of water will be restricted prior to reaching our kitchen or bathroom skins. The only way to eliminate this hot water heater problem is to connect new ¾-inch water lines to your system. Another type of problem that may negatively impact your water pressure includes calcium deposits in water pipes.



As magnesium and calcium begin to form in your pipes, the diameter of your water lines will become smaller. As a result, the warm water from your water heater will not be able to travel in an efficient manner to your sinks or appliances. Since the process of replacing water pipes includes removing drywall, an average homeowner that does not have a plumbing license will not be able to fix this hot water heater problem.

https://www.wmhendersoninc.com/blog/8-reasons-your-water-heater-is-not-working-how-to-fix/#:~:text=If%20the%20hot%20water%20heater,anode%20rod%20in%20your%20system.


What Would Cause My Electric Water Heater to Stop Working?

As an enthusiastic reader on How to Troubleshoot and Repair an Electric Water Heater, I assumed sharing that editorial was valuable. Don't hesitate to take the opportunity to distribute this page if you enjoyed reading it. Thank-you for your time spent reading it.


Call

Leave a Reply

Your email address will not be published. Required fields are marked *